If your Epson L5290 printer has suddenly stopped working and started flashing warning lights like it’s trying to signal a plane, Reset Epson L5290 Printer don’t panic. You’re not alone. A lot of users run into problems with this model, especially when it comes to ink pad warnings or communication errors. The good news? Most of the time, the fix is simpler than you’d expect.
Whether your printer just needs a basic refresh or a full reset, I’ll walk you through it—no tech degree required.
Start with the Basics: Do a Soft Reset
Think of this as the printer equivalent of a deep breath.
Here’s what to do:
- Turn the printer off using the power button.
- Unplug it from the wall—yes, the whole thing.
- Walk away for about two or three minutes. Maybe grab a coffee.
- Plug the printer back in and turn it on.
You’d be surprised how often this clears up minor issues. It’s simple, but it gives the machine a fresh start.
Dealing with the “Ink Pad is Full” Error
This is the most common issue with Epson printers. The L5290 keeps track of how much ink has been wasted during cleaning cycles and regular use. When it hits a certain limit, the printer assumes the internal sponge pad is saturated—even if it isn’t.
So, what you’re really resetting is that internal counter.
Here’s how to reset the ink pad counter:
What You’ll Need:
- A Windows computer (this process won’t work on Mac).
- A reliable version of the reset Epson L5290 utility.
⚠️ Be careful where you download this tool from. Comply with a technical forum or source with proven reviews. Many shaded copies swim on the Internet.
Step-by-Step Guide:
- Extract and open the reset utility on your PC.
- Select your printer model (L5290) and the correct USB port.
- Click on “Particular adjustment mode.”
- Find and click on “Waste Ink Pad Counter.”
- Hit the “Check” button to view your current ink pad status.
- Click “Initialize” to reset the counter.
- Turn the printer off, wait a few seconds, then turn it back on.
And just like that, you should be back in business.
A Word of Caution
Resetting the ink pad counter doesn’t actually clean the sponge—it just tells the printer to stop complaining about it. If you’ve reset it a few times over the years, it’s smart to get the pad cleaned or replaced eventually. Otherwise, you could end up with a mess of ink inside your printer.
Also, don’t go hunting for reset tools from random websites. Some include malware, and you don’t want to trade a broken printer for a broken computer.
Still Not Working?
If the error is preserved after the entire discharge, there may be something else as a problem of hardware or deeper software failure. In this case, it is recommended to contact EPSON support or deliver a printer to a professional.
Final Thoughts
Resetting an Epson L5290 printer might sound intimidating, but once you know what’s going on under the hood, it’s really not that bad. Whether you’re dealing with a temporary freeze or that infamous ink pad message, a little bit of patience (and the right steps) can save you the trouble of buying a new printer or calling for help.
Just take it one step at a time, and you’ll be back to printing in no time.
How To Download Epson L3260 Resetter
FAQs
- Why do you drop the printer?
Modify errors such as the necessary service, the Wi-Fi problem or the responsible behavior. - How can you do basic discharge?
Turn off the printer, turn off for 30 seconds, reconnect, and turn on. - How to drop Wi-Fi?
Reset the House> Settings> Network Settings> Network Settings and check. - How can I throw everything in the factory environment?
Move to your home, restore your setting> default settings, and then select the contents to be reset. - What happens if you get a “ink pillow” message?
To drop the waste counter, you need an EPSON adjustment program for the L5290. After launch:
- Select the model
- Go to the waste ink pad counter
- Click “OK”, then initialize the printer and start again.
