🖨️ Epson L1380 Adjustment Program: When Your Printer Just Needs a Little Reset

Have you ever had your Epson L1380 abruptly stop working and flash an odd “Service Required” notice when you were in the middle of printing anything critical, like a client invoice or a project report?
Calm down. Nothing is wrong with your printer. It’s merely exercising caution. Fortunately, the Epson Adjustment Program offers a straightforward solution that eliminates the need for a trip to the repair shop.

What’s Really Going On with Your Epson L1380?

Epson printers, like the L1380, are smart machines. They monitor the amount of ink that passes through them during printing and internal cleaning operations. That extra ink is collected by the waste ink pad, which is a hidden sponge. Because it believes the pad may be full, whether it is or not, the printer eventually locks itself to prevent any potential ink overflow.
As a result, when it says “Service Required,” it really means “Hey, I’ve worked hard.” Please make sure I’m still well enough to go on.
That need is met by the adjustment program.

️ What Is the Epson Adjustment Program for L1380?

A useful tool designed to reset internal counters, particularly the waste ink pad counter, is the Epson L1380 Adjustment Program. It assists in reviving your printer when it stops printing because of suspected usage.
Consider it similar to pressing the printer’s memory refresh button.

When Should You Use It?

You might need to use the Epson L1380 reset tool when:

• You see a “Service Required” message
• Your printer stops responding with blinking red lights
• You’ve already tried restarting the printer and it didn’t work
• You know the waste ink pad isn’t really full yet

How to Use the Epson L1380 Resetter Tool

It’s pretty simple, even if you’re not super tech-savvy:

1. Download the adjustment tool specifically for the L1380 model.
2. Extract the files and right-click on AdjProg.exe → “Run as Administrator.”
3. In the tool, select your printer model and the correct port.
4. Click “Particular Adjustment Mode.”
5. Choose “Waste Ink Pad Counter”.
6. Hit “Check” then “Initialize”.
7. Once it finishes, turn your printer off and then back on.

Boom. Your Epson L1380 is ready to print again.

⚠️ A Word of Caution

Resetting the counter doesn’t empty the actual waste ink pad. If you’ve reset your printer multiple times over the years, it’s a good idea to clean or replace the physical ink pad. Otherwise, you might end up with an actual ink spill.
Also, be sure to disconnect from the internet temporarily while running older adjustment tools—they’re sometimes sensitive to network activity.

Final Thoughts

Printers don’t last forever, but they also shouldn’t be thrown out at the first sign of an error. If your Epson L1380 has been loyal to you for years, it deserves a second chance. The adjustment program gives you just that—without any cost, hassle, or technical drama.
Just a few clicks, and you’re back to printing.

Epson L1380 Adjustment Program – Frequently Asked Questions (FAQ)

❓ What is the Epson L1380 Adjustment Program?
The Epson L1380 Adjustment Program is a service utility tool designed to reset internal counters in the printer, especially the waste ink pad counter, which often causes the “Service Required” error.
❓ Why is my Epson L1380 showing “Service Required”?
This message typically appears when the printer thinks the waste ink pad is full. It’s a safety measure to prevent ink overflow—even if the pad isn’t actually full yet.
❓ Is it safe to use the adjustment program on my L1380 printer?
Yes, if used correctly. It’s a widely accepted method for fixing common Epson errors, especially when you’re outside the warranty period. Just make sure you download the tool from a safe source.
❓ Do I need to replace the waste ink pad after resetting?
Not immediately. But if you’ve reset your printer multiple times, it’s smart to clean or replace the waste ink pad to prevent leakage or printer damage over time.
❓ Can I use the adjustment tool on macOS or Linux?
No. The Epson Adjustment Program is Windows-only. You’ll need a PC or a Windows virtual machine to run it.