How To Reset Epson M1100: 100% Fix Red Light Blinking

You can get into a scenario where the Epson M1100 printer stops functioning because the ink pad counter reaches its limit. To resume printing after this, you must reset the Epson M1100. We’ll walk you through the easy process of resetting your Epson M1100 without the need for expert assistance in this article. This procedure will help you rapidly get your printer back to working, regardless of your level of experience.

Why Do You Need to Reset Epson M1100?

The amount of waste ink absorbed by the internal pads of Epson printers is monitored by an ink pad counter. The printer will stop working and show an error like this if the counter reaches its maximum limit:
“Service Required”
“Printer’s ink pads are at the end of their service life”
You must use a reset tool or software to reset the waste ink counter in order to resolve this.

Things You Need Before Reset Epson M1100

Make sure you have the following before beginning the reset process:

✔ A laptop or PC running Windows (the reset software often runs on Windows)
✔ USB Cable (for attaching the printer to the PC)
Download a dependable reset program, such as Adjustment Program or WIC Reset Utility, to reset the Epson M1100.
✔ Printer in Error State: The printer ought to display the error message “Ink pad counter.”

Step-by-Step Guide: How To Reset Epson M1100

In order to reset your Epson M1100 printer, simply follow these steps:

step 1:get the reset software.

• Look up “Epson M1100 reset tool” on the internet.
• Install a reliable program, such as the official Epson Adjustment Program or WIC Reset Utility.
• Set up the program on your Windows computer.

Step 2: Switch to Service Mode

• Switch the printer off.
• If there is a maintenance button, press it combined with the power button.
• Hold on until the lights on the printer blink.
• Your printer is now in Service Mode; let go of the buttons.

Step 3: Attach the printer to the computer

• The Epson M1100 can be connected to your computer using a USB cable.
• Verify that the printer is recognized.

step 4:Run the Reset Software in.

• Launch the installed reset tool.
• Choose “Epson M1100” from the list of printers.
• “Read Waste Ink Counter” can be clicked to view the current count.
• To remove the data, click “Reset Waste Ink Counter”.

step 5:Restart the printer in.

• Shut down the program.
• Switch the printer off, then back on.
• Your printer should now function normally after the error has been resolved.

How To Download Epson M1100 Resetter Free?

Click Here

Alternative Method: Manual Reset (Without Software)

If you decide not to use software, you can try a manual reset:

1. Turn off the printer.
2. Press and hold the Power + Paper Feed + Ink button for a few seconds.
3. Even though it doesn’t always work, the printer may reset itself; this is a worthwhile attempt.

Tips to Avoid Frequent Resets

• Use High-Quality Ink: Low-quality ink can clog and result in more ink waste.
• Clean Print Heads Regularly: Prevents excess ink absorption.
• Replace Ink Pads (If Possible): Some people swap out their used ink pads by hand.

FAQs About Resetting Epson M1100

1. Is resetting Epson M1100 safe?
Yes, although the ink pads may fill with frequent resets. They might eventually need to be replaced.

2. Will resetting delete my printer settings?
The waste ink counter is the only thing it clears.

3. What if the reset fails?
The majority of reset tools are limited to Windows.

4. Can I reset Epson M1100 on Mac?
Make use of a virtual machine or a Windows computer.

Conclusion

You now understand how to quickly reset the Epson M1100. This procedure will assist you in avoiding the ink pad error whether you choose to utilize software or a manual approach.