How To Reset Epson M1120

Your Epson M1120 printer probably needs to be reset if it is refusing to print, blinking indicator lights, or displaying error messages. Although the EcoTank monochrome printer is designed to be efficient, it may eventually encounter problems like any other gadget. The good news? Often, all it takes to get things back on track is a reset.

This article will walk you through the process of soft resets and waste ink pad counter resets for the Epson M1120 printer.

Why Reset Your Epson M1120?

Here are some common signs that your Epson M1120 may need a reset:

• Flashing red/orange lights on the control panel
• A “Service Required” or “Ink Pad Full” message
• Printer not responding to print commands
• Network or connection problems

Most of these issues are software-related and don’t require a trip to the repair shop.

To start, perform a power cycle soft reset.

Begin with the simplest option available. Temporary system problems can often be fixed with a soft reset.

1.Steps to follow:

1. Press the power button to switch off the printer.
2. Unplug it from the electrical outlet.
3. Wait for one to two minutes.
4. Reconnect the printer’s plug and turn it back on.

This simple power cycle often resolves minor software glitches or temporary unresponsiveness.

2. Repair any Wi-Fi problems by resetting the network configuration.
Resetting the network settings can be a good idea if your Epson M1120 is experiencing issues connecting to Wi-Fi.

step:

1. On the printer’s control panel, press the Wi-Fi button until the network light begins to blink.
2. The Network Reset button, which is often found on the side or back of the printer, can be pressed and held for
3. five to ten seconds to make the lights flash alternately.
4. After pressing the button, wait. The network settings for the printer will be reset.

The Epson setup tool or the print settings on your smartphone can then be used to connect the printer to your wireless network.

3. Factory Reset (Hard Copy)

To completely revert the printer to its original settings, follow these steps:
step:

1. Press and hold both the Network and Information buttons simultaneously.
2. Continue holding them for approximately ten seconds.
3. The printer should reboot and return to its default settings.

This can be beneficial if you wish to erase all previous configurations before resetting the printer or if you are dealing with persistent problems.

4. Reset the Waste Ink Pad Counter (When “Service Required” Appears)

Epson printers, including the M1120, use internal pads to absorb excess ink during maintenance tasks like printhead cleaning. Over time, the printer may show a “Service Required” message once it thinks these pads are full.

This doesn’t necessarily indicate that the pads are completely full; it simply means that the printer’s software assumes they might be. You can reset the internal counter with a specialized utility.

⚠️ Caution: Epson does not officially endorse third-party reset utilities. Use them at your own risk, and ensure they are downloaded from trustworthy sources. Always scan files for potential malware.
step:

1. Obtain a reputable Epson reset utility for the M1120 model.
2. Connect your printer to your computer using a USB cable.
3. Launch the utility, select your printer model, and execute the ink pad counter reset function.
4. After the reset finishes, restart the printer.

If you’ve performed this action multiple times, it may be time to check or replace the physical waste ink pads.
Useful Maintenance Suggestions
Keep your firmware updated by utilizing Epson’s software utility.
Only conduct printhead cleaning when necessary—overdoing it can consume more ink and accelerate wear on the pads.
Always turn off the printer correctly using the power button instead of just unplugging it.

How To Download Epson M1120 Resetter Free?

Click HereAMP

Conclusions

The Epson M1120 reset procedure is typically simple and can save you a great deal of trouble. The correct reset procedure can restore your printer’s functionality, whether you’re attempting to restore default settings or are dealing with a persistent error message.

If your problems continue after attempting every reset, it might be necessary to speak with a specialist or get in touch with Epson support.

FAQs: How to Reset Epson M1120 Printer

1. Why would I need to reset my Epson M1120 printer?

Resetting your Epson M1120 can help fix several issues—like persistent error messages, ink pad end-of-life notifications, or paper feed problems. It’s basically like giving your printer a fresh start when it’s acting up.

2. Is there a difference between a soft reset and a full reset?

Yes!
Soft Reset: More like a quick reboot. This clears temporary errors and restores the printer to its previous state.
Full Reset (Factory Reset): This erases all custom settings and returns the printer to how it was out of the box.

3. How do I perform a soft reset?

Here’s how you can do it:

• Turn off your printer.
• Unplug it from the power source.
• Wait about 60 seconds.
• Plug it back in and power it on.

That’s it! If the issue was minor, this might just fix it.

4. How do I do a factory reset on the Epson M1120?

To reset to factory settings:

• Make sure the printer is ON.
• Press and hold the Network button (located at the back or side panel depending on the model).
• Keep holding it for about 10 seconds until the Wi-Fi light flashes.
• Release the button.

This will reset all settings, including Wi-Fi and network info. You’ll have to set those up again

5. My printer says the ink pad is at the end of its service life. How do I reset that?

This message means the printer’s waste ink pad is nearly full. You can reset the counter using a utility tool like Epson Adjustment Program (also known as Epson Resetter). But:

• This is more of a workaround than a fix.
• The ink pad can eventually overflow if not replaced.

If you’re unsure, it’s best to get the pad replaced by a technician.